Quiz-summary
0 of 10 questions completed
Questions:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Information
Practice Questions
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
Results
0 of 10 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 points, (0)
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Answered
- Review
-
Question 1 of 10
1. Question
For non-routable legacy protocols, what method was originally created to provide transport?
Correct
The GRE was originally created to provide transport For non-routable legacy protocols
Incorrect
The GRE was originally created to provide transport For non-routable legacy protocols
-
Question 2 of 10
2. Question
Which source should not be dynamically advertised via an IGP into a GRE tunnel?
Correct
GRE tunnel source interface or source IP address should not be dynamically advertised via an IGP into a GRE tunnel
Incorrect
GRE tunnel source interface or source IP address should not be dynamically advertised via an IGP into a GRE tunnel
-
Question 3 of 10
3. Question
Which two modes of packet transport are supported by IPsec?
Correct
Tunnel and transport are modes of packet transport supported by IPsec
Incorrect
Tunnel and transport are modes of packet transport supported by IPsec
-
Question 4 of 10
4. Question
What are the two encryption protocols that should be avoided?
Correct
DES and 3DES are the two encryption protocols that should be avoided
Incorrect
DES and 3DES are the two encryption protocols that should be avoided
-
Question 5 of 10
5. Question
Point out the message exchange mode that is used to set up an IKEv1 IPsec SA?
Correct
Quick message exchange mode is used to set up an IKEv1 IPsec SA
Incorrect
Quick message exchange mode is used to set up an IKEv1 IPsec SA
-
Question 6 of 10
6. Question
LISP separates into which two IP addresses?
Correct
RLOCs and EIDs are two IP addresses separates by LISP
Incorrect
RLOCs and EIDs are two IP addresses separates by LISP
-
Question 7 of 10
7. Question
The LISP data plane uses which destination UDP Port?
Correct
The LISP data plane uses 4341 destination UDP Port. The destination port refers to one of those device that receives the data.
Incorrect
The LISP data plane uses 4341 destination UDP Port. The destination port refers to one of those device that receives the data.
-
Question 8 of 10
8. Question
Name the UDP port officially assigned by the IANA for VXLAN?
Correct
UDP Port 4789 is the port officially assigned by the IANA for VXLAN
Incorrect
UDP Port 4789 is the port officially assigned by the IANA for VXLAN
-
Question 9 of 10
9. Question
Two transmitters are operating with a power of 100 mW each. What will be the difference in db when you compare the two non-variable power levels?
Correct
Two transmitters are operating with a power of 100 mW each. The difference will be 0 db when you compare the two non-variable power levels?
Incorrect
Two transmitters are operating with a power of 100 mW each. The difference will be 0 db when you compare the two non-variable power levels?
-
Question 10 of 10
10. Question
On reconfiguring a transmitter on a newer level of 34 mW which was previously on the power level of 17 mW, How much power will be increased in db?
Correct
On reconfiguring a transmitter on a new level of 34 mW, The power will be increased by 3 db.
Incorrect
On reconfiguring a transmitter on a new level of 34 mW, The power will be increased by 3 db.