Quiz-summary
0 of 10 questions completed
Questions:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Information
Practice Questions
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
Results
0 of 10 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 points, (0)
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Answered
- Review
-
Question 1 of 10
1. Question
The transmission method that is multicast, known for?
Correct
The one-to-many transmission method is multicast known for.
Incorrect
The one-to-many transmission method is multicast known for.
-
Question 2 of 10
2. Question
For administrative scooped block which multicast ranges match?
Correct
239.0.0.0 to 239.255.255.255 and 239.0.0.0/8 multicast address range match the administratively scooped block.
Incorrect
239.0.0.0 to 239.255.255.255 and 239.0.0.0/8 multicast address range match the administratively scooped block.
-
Question 3 of 10
3. Question
What is a requirement for a host to start receiving multicast traffic?
Correct
The host needs to send a solicited membership report to start receiving multicast traffic.
Incorrect
The host needs to send a solicited membership report to start receiving multicast traffic.
-
Question 4 of 10
4. Question
Point out the main difference between IGMPv2 and IGMPv3?
Correct
IGMPv3 introduced with source filtering support, a new IGMP membership report.
Incorrect
IGMPv3 introduced with source filtering support, a new IGMP membership report.
-
Question 5 of 10
5. Question
In layer 2 floodings of multicast frames can be avoided with?
Correct
By enabling IGMP snooping control flooding of multicast frames in layer 2 can be avoided.
Incorrect
By enabling IGMP snooping control flooding of multicast frames in layer 2 can be avoided.
-
Question 6 of 10
6. Question
The best statement described for SPT and RPT?
Correct
The source is the root of trees, And SPT defines as a source tree and The rendezvous point is the root of the tree, and RPT is defined as a shared tree
Incorrect
The source is the root of trees, And SPT defines as a source tree and The rendezvous point is the root of the tree, and RPT is defined as a shared tree
-
Question 7 of 10
7. Question
On receiving an IGMP join from a receiver what exactly LHR do?
Correct
LHR sends a PIM to join toward the RP as it receives an Internet Group Management Protocol(IGMP) join from a receiver.
Incorrect
LHR sends a PIM to join toward the RP as it receives an Internet Group Management Protocol(IGMP) join from a receiver.
-
Question 8 of 10
8. Question
If there is no interesting receiver what does FHR do when the attached source becomes active?
Correct
FHR unicasts encapsulated register messages to the RP thus stops after a register stops from the RP.
Incorrect
FHR unicasts encapsulated register messages to the RP thus stops after a register stops from the RP.
-
Question 9 of 10
9. Question
A group-to-RP mapping mechanism developed by Cisco is?
Correct
Phantom RP is a group-to-RP mapping mechanism developed by Cisco.
Incorrect
Phantom RP is a group-to-RP mapping mechanism developed by Cisco.
-
Question 10 of 10
10. Question
Highlight the main causes of quality of service issues?
Correct
Lack of bandwidth, Latency, Jitter, and Packet loss are the main causes of quality of the service issues.
Incorrect
Lack of bandwidth, Latency, Jitter, and Packet loss are the main causes of quality of the service issues.