Quiz-summary
0 of 10 questions completed
Questions:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Information
Free Practice Questions.
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
Results
0 of 10 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 points, (0)
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Answered
- Review
-
Question 1 of 10
1. Question
Which of the following would be true if the lead is used to made inlet service pipes?
Correct
It can once in a while be perceived by a colossal bump around a cleaned joint.
Incorrect
It can once in a while be perceived by a colossal bump around a cleaned joint.
-
Question 2 of 10
2. Question
Which of the following is true about central heating?
Correct
Zones that are isolated can easily be approached through central heating systems.
Incorrect
Zones that are isolated can easily be approached through central heating systems.
-
Question 3 of 10
3. Question
A condition under which a heater should be supplanted?
Correct
It would be supplanted if it is out of order and broken.
Incorrect
It would be supplanted if it is out of order and broken.
-
Question 4 of 10
4. Question
Which of the following is true about a multi-zoned constrained air warming framework?
Correct
A multi-zoned constrained air warming framework requires mechanized conduit dampers.
Incorrect
-
Question 5 of 10
5. Question
A bit of leeway of a constrained high temp water warming framework is?
Correct
A constrained high temp water warming framework would cause less heat change and versatility to be different zones.
Incorrect
A constrained high temp water warming framework would cause less heat change and versatility to be different zones.
-
Question 6 of 10
6. Question
Fast intends to decide if an evaporator is for steam or heated water is?
Correct
An evaporator is for steam or heated water is on the off chance that it incorporates a water-level measure and decides to intends fast.
Incorrect
An evaporator is for steam or heated water is on the off chance that it incorporates a water-level measure and decides to intends fast.
-
Question 7 of 10
7. Question
Which of the following matches with a water radiator temperature and pressing factor alleviation valve?
Correct
A water radiator temperature and pressing factor alleviation valve always be furnished with a release pipe finishing in an obvious area.
Incorrect
A water radiator temperature and pressing factor alleviation valve always be furnished with a release pipe finishing in an obvious area.
-
Question 8 of 10
8. Question
In cooling systems, One ton refers to?
Correct
One ton basically states that requirement for around every 700 square feet of living space to cool in an hour.
Incorrect
One ton basically states that requirement for around every 700 square feet of living space to cool in an hour.
-
Question 9 of 10
9. Question
At which point a split-framework climate control system is likewise important for a warming framework?
Correct
A split-framework climate control system is likewise important for a warming framework, blower should have in any event two rates.
Incorrect
A split-framework climate control system is likewise important for a warming framework, blower should have in any event two rates.
-
Question 10 of 10
10. Question
The temperature of air releasing from the registers during the cooling cycle?
Correct
The temperature of air releasing from the registers should be around 15 degrees lower than the temperature of the air in the room to maintain the cycle’s equilibrium.
Incorrect
The temperature of air releasing from the registers should be around 15 degrees lower than the temperature of the air in the room to maintain the cycle’s equilibrium.